CDYMK - 845 0306 KODAK FLEXICOLOR DEVELOPER REPLENISHER LORR, PART C
- MSDS: CDYMK
- Manufacturer: EASTMAN KODAK COMPANY
- Product Name: 845 0306 KODAK FLEXICOLOR DEVELOPER REPLENISHER LORR, PART C
- National Stock Number: 6750-00D006017
Product Identification
Product ID:845 0306 KODAK FLEXICOLOR DEVELOPER REPLENISHER LORR, PART C
MSDS Date:08/09/1996
FSC:6750
NIIN:00D006017
Kit Part:Y
MSDS Number: CDYMK
Responsible Party
ROCHESTER, NY 14650
US
Emergency Phone: 716-722-5151
Info Phone: 716-722-5151/716-724-4501
Cage: 19139
Contractor
Telephone: 800-828-6203
Cage: 5K871
Ingredients
4-(N-ETHYL-N-2-HYDROXYETHYL)-2-METHYLPHENYLENEDIAMINE
CAS: 25646-77-9
RTECS: KJ6477000
Fraction By Weight: 40-45%
SODIUM BISULFITE (SASA III) (CERCLA)
CAS: 7631-90-5
RTECS: VZ2000000
Fraction By Weight: 1-5%
OSHA PEL 5 MG/M3
ACGIH TLV: 5 MG/M3; 9596
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
WATER
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: 50-55%
Hazards
Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:GENERAL: MAY CAUSE BLOOD DISORDERS
BASED ON ANIMAL DATA. INHHALATION-LIBERATES SULFUR DIOXIDE WHICH
CAN CAUSE IRRITATION TO THE RESPIRATORY TRACT. EYES-CAUSES
IRRITATION. SKIN-MAY CAUSE IRRITATION. MA Y CAUSE ALLERGIC SKIN
REACTION. INGESTION-HARMFUL IF SWALLOWED. MAY CAUSE KIDNEY DAMAGE.
Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT
CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT
CARCINOGENS.
Effects of Overexposure:INHALATION-SOME ASTHMATICS OR HYPERSENSITIVE
INDIVIDUALS MAY EXPERIENCE DIFFICULTY BREATHING. INGESTION-MAY
CAUSE IRRITATION OF THE GASTROINTESTINAL TRACT.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHALATION-MOVE TO FRESH AIR. TREAT SYMPTOMATICALLY. GET
MEDICAL ATTENTION IF SYMPTOMS PERSIST. EYES-IMMEDIATELY FLUSH WITH
WATER FOR 15 MIN. GET MEDICAL ATTENTION. SKIN-IMMEDIATELY FLUSH
WITH PLENTY OF WATER & WASH WITH A NON-ALKALINE SKIN CLEANER. GET
MEDICAL ATTENTION. INGESTION-INDUCE VOMITING AS DIRECTED BY MEDICAL
PERSONNEL. CALL A PHYSICIAN OR POISON CONTROL CENTER IMMEDIATELY.
Fire Fighting
Flash Point:NONE
Extinguishing Media:WATER SPRAY, CARBON DIOXIDE, DRY CHEMICAL, ALCOHOL
FOAM. USE WATER SPRAY TO KEEP FIRE EXPOSED CONTAINERS COOL.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS AND
FULL PROTECTIVE GEAR. FIRE OR EXCESSIVE HEAT MAY PRODUCE HAZARDOUS
DECOMPOSITION PRODUCTS.
Unusual Fire/Explosion Hazard:ELEVATED TEMPERATURES CAN CAUSE
DECOMPOSITION.
Accidental Release
Spill Release Procedures:FLUSH TO SEWER WITH LARGE AMOUNTS OF WATER.
MAY REQUIRE NEUTRALIZATION IF PH <2.0 OR >12.5. PREVENT RUNOFF FROM
ENTERING DRAINS, SEWERS OR STREAMS. ABSORB SPILL WITH VERMICULITE
OR OTHER INERT MATERIA L, THEN PLACE IN A CHEMICAL WASTE CONTANER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN A COOL PLACE. KEEP AWAY FROM
INCOMPATIBLE SUBSTANCES. KEEP CONTAINER CLOSED.
Other Precautions:AVOID CONTACT WITH EYES, SKIN AND CLOTHING. WASH
THOROUGHLY AFTER HANDLING. USE WITH ADEQUATE VENTILATION.
Exposure Controls
Respiratory Protection:IF ENGINEERING CONTROLS DO NOT MAINTAIN AIRBORNE
CONCENTRATIONS BELOW RECOMMENDED EXPOSURE LIMITS, AN APPROVED
RESPIRATOR MUST BE WORN. RESPIRATOR TYPE: ACID GAS.
Ventilation:GOOD GENERAL VENTILATION (TYPICALLY 10 AIR CHANGES PER
HOUR) SHOULD BE USED. RATES SHOULD MATCH CONDITIONS.
Protective Gloves:WEAR IMPERVIOUS GLOVES.
Eye Protection:SAFETY GLASSES OR GOGGLES
Other Protective Equipment:EYE BATH, WASHING FACILITIES, SAFETY SHOWER.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
KEY2: HCC=C1. THIS IS A THREE PART KIT WITH A WORKING SOLUTION.
CORROSIVE.
Chemical Properties
HCC:C2
Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:18
Vapor Density:0.6
Spec Gravity:1.10
pH:2.0
Solubility in Water:COMPLETE
Appearance and Odor:COLORLESS. ODORLESS. LIQUID.
Percent Volatiles by Volume:50-60
Stability
Stability Indicator/Materials to Avoid:YES
BASES, STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:STABLE; HOWEVER, MATERIAL CAN DECOMPOSE
ABOVE 170C. AVOID TEMPERATURES ABOVE 70C.
Hazardous Decomposition Products:CARBON DIOXIDE, CARBON MONOXIDE,
OXIDES OF SULFUR, OXIDES OF NITROGEN.
Disposal
Waste Disposal Methods:DISCHARGE, TREATMENT OR DISPOSAL MAY BE SUBJECT
TO LOCAL, STATE AND FEDERAL REGULATIONS. CONTRACT WITH A LICENSED
CHEMICAL DISPOSAL AGENCY.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.